How to Read Corrupted BKF Files in Windows 10, 11 and Other Versions?

Comments · 34 Views

Do you want to know if Windows 10, 8.1, 8, or 7 can read corrupted BKF files? Do you need to make a backup of your data but are having trouble finding NTBackup? You've come to the correct thread if you fall under this category of users. This article describes how to open and utilize backup BKF files without running into any problems.

Download Now

There's no longer a reason not to regularly backup your computer. If for any reason your PC stops functioning properly, you may be able to restore it using the Windows backup. Reading BKF files necessitates the pursuit of Windows 7 and above versions. The reason for this issue might be that Microsoft no longer supports NTBackup for Windows versions other than Windows 2003 and XP. As a result, users of Windows 7 or later frequently don't know how to open corrupted BKF files in Windows 10.

 

We'll start by going over the fundamentals of the NTBackup tool and BKF files before learning how to access Windows backups in Windows 10.

 

Windows NTBackup Tool: What is it?
Microsoft included NTBackup as a built-in program for Windows NT 3.51 and 4.0, Windows 2000, XP, and Windows 2003. The format that Windows' backup utility uses, BKF files, can be created using it. Every time a user needs to fix a machine, their system can quickly provide them with the necessary information.

Sadly, Microsoft has left this program out of more recent Windows versions (7, 8, 8.1, and 10). It has been replaced by the Backup and Restore program, which uses virtual hard drive files to backup data just as well. Consequently, reading corrupted BKF files on Windows 10, 8, 8.1, or 7 cannot be done without creating problems for end users.

 

Windows Backup Files (BKF): What are they?
Windows uses the BKF file format for storing backups. You can be sure that your data is protected because only Windows backup software can read these files. You can also use the files in this folder to get your computer's data back.

We can now examine how to access BKF files in Windows 10 and earlier versions after learning what a BKF file is and how to use the Backup tool. The Windows Backup Utility, sometimes referred to as the Microsoft Backup Utility, may be used to store data on tape drives or ZIP drives. Microsoft Windows NT and later versions of Windows XP came pre-installed with this application. This software is closely related to the BKF file format.

 

Method 1: Use the NTBackup Tool to Open BKF Files on Windows 11
Other than NTbackup, BKF files cannot be utilized or opened in Windows. Consequently, you will need to manually download and install the NTBackup tool in order to use BKF files with contemporary versions of Windows. As system software, you are already aware that it needs a few more files. Thus, you should move the necessary executable and accompanying files to the same PC directory as the NTBackup utility.

Download nt5backup.cab from the internet to get started. The.rar file can be downloaded immediately and is free of charge. Upon extracting the archive,


It is recommended that you save ntbackup.exe, ntmsapi.dll, and vssapi.dll in the same folder. Furthermore, the required DLL files can be copied from an outdated Windows installation or computer using the NTBackup utility. The software can be launched with just the.exe file, but it needs the other files to work properly.

Discover How to Use NTBackup Utility Step-by-Step

  • The instructions below will walk you through opening and reading corrupted BKF files on Windows 10 using the NTBackup utility. You cannot perform these actions until you have downloaded and extracted the nt5backup.cab file from your PC.
  • Double-clicking the saved ntbackup.exe file will launch it.
     The error notice "Removable Storage not Running" will appear in a pop-up window. To continue, select the OK button.
  • Select the Browse option to upload the BKF file from your computer.
  • Checking the box and moving on to the next step will enable the restoration of data and settings.
  •  The Backup and Restore Wizard will launch, and you can continue by clicking the Next button.
  •  Choose the newly created BKF file by selecting it by choosing "Add" and then "Browse."
  •  The accessible drives and folders are shown on the left side of the tab.
  • You can view and extract the contents of BKF files in the right pane. However, it proves to be challenging to locate a certain document.
  • Following the aforementioned procedures, Windows 10, 8.1, 8, and 7 may open BKF files. But before being used, it's a challenging procedure that needs close observation and instruction.


Generally speaking, a utility should never be used on a system that it was not intended to be used on. Using these third-party tools could damage your operating system in a number of ways. Apart from these constraints, there is no assurance that the previously indicated tactic will work in every circumstance.

 

Advantages of Handwritten Solutions

  • Sadly, we are unable to access the backup cassette at this time, therefore we are unable to access the data that was saved on it.
  • The backup needs to be operating independently on the system.
  • Because this procedure demands technical understanding, laypeople cannot utilize it.
  • The operation will fail if the backup files (.BKF) are corrupted. Consequently, Windows is unable to use the software to view damaged BKF files.

 

Using Windows 10's Automatic Software to Read Corrupted BKF Files


If the BKF files in the backup sets are corrupted, there is no way to use the ntbackup.exe program. You will need to find another method because Windows 10 does not presently support reading corrupted BKF files. The best free solution for opening and reading BKF Windows files is the Softaken BKF Recovery Tool. It works flawlessly with all BKF file format versions. The utility can read and repair corrupted versions of Windows NTBackup and Symantec Backup Exec BKF files, among other formats.

How Do I Use the Software to Read BKF Files?
1. Start by visiting the official website, after which download and set up this BKF file reader application.
2. After that, select the BKF files or folder to upload by clicking the Open button.
3. After that, select the Extract option by clicking on the Action tab.

In summary

Because NTBackup is no longer supported, BKF files created by earlier versions of Windows Backup cannot be opened in more recent versions. Follow the steps in the blog post to read corrupted BKF files in Windows 10, 8.1, 8, or 7 and to create a backup of the file. Professional assistance is required for this labour-intensive task if you value the protection of your data. Even worse news: Damaged or corrupted BKF files cannot be read by it. It is highly suggested to use the free BKF Viewer Tool on all Windows versions to easily open corrupted as well as healthy BKF files, saving you time.

disclaimer
Comments