Wet Chemical Innovation: Enhancing Reliability in Electronic Component Manufacturing

Comments · 12 Views

Wet chemicals play an essential role in various processes involved in the electronics and semiconductor industries. From wafer cleaning and preparation to etching and deposition, wet chemistry enables high precision manufacturing of advanced semiconductor devices and integrated circuits. Wet processing allows for scalable, cost-effective solutions compared to dry processing techniques such as plasma etching. In this article, we will explore some of the major types of wet chemicals used and their applications in electronics manufacturing.

Wafer Cleaning Chemicals

Cleaning wafers is one of the initial and most critical steps in semiconductor fabrication. Wafers must be free of particles and contaminants before any circuitry can be patterned. Various chemical formulations are employed for pre-cleanup, particle removal and cleaning after each fabrication step. Some common wafer cleaning chemicals include:

 

- SC1 Solution: Mixture of ammonium hydroxide, hydrogen peroxide and water. Used for organic residue removal through oxidation.

 

- SC2 Solution: Hydrogen peroxide, hydrochloric acid and water. Cleans via oxidation and etching to remove inorganic contaminants and metals.

 

- RCA Standard Clean 1 (SC1) and Clean 2 (SC2) are industry standard wafer cleaning processes employing the above solutions in sequential steps.

 

- Solvents such as acetone and isopropyl alcohol (IPA) play an important role in drying wafers without water stains after cleaning.

 

- Deionized (DI) water rinses are vital after each cleaning chemical step to remove residue through dilution. Ultra-pure DI water prevents recontamination.

 

These water-based formulations achieve high levels of particulate removal without damaging substrate materials like silicon. Their scalable and non-harsh nature makes wet cleaning well-suited for high-volume semiconductor manufacturing.

Photoresist Chemicals

Photoresists are light-sensitive polymers that form the foundation of photolithography - a core microchip fabrication technique. They are applied to wafers as a liquid resist solution:

 

- Positive resists like Novolak and polymethyl methacrylate (PMMA) become soluble when exposed to ultraviolet (UV) light, allowing removal of illuminated areas during development.

 

- Negative resists such as SU-8 epoxy and polyimides become insoluble when exposed, leaving non-illuminated regions for removal.

 

Resist solvents help in uniform spinning coating application and stripping of unused resist. Common resist solvents are propylene glycol monomethyl ether (PGME) and ethyl-lactate. Dilute alkaline developers dissolve exposed positive resist regions while acid-based developers remove unexposed negative resist areas. Photoresists and their liquids enable the lithographic patterning backbone of integrated circuit (IC) manufacturing.

Etching Chemicals

Etching eliminates material in pre-defined areas to sculpt microstructures. Wet etching baths do this chemically rather than through plasma or beams. These etching solutions play a major role:

 

- Hydrofluoric acid (HF) etches silicon dioxide (SiO2), silicon oxynitride (SiON) and borophosphosilicate glass (BPSG). Dilute HF removes native oxide before deposition or bonding.

 

- Buffered oxide etch (BOE) is a mixture of HF, water and ammonium fluoride for controlled SiO2 etching.

 

- Potassium hydroxide (KOH) and tetramethylammonium hydroxide (TMAH) selectively etch silicon crystals, leaving crystalline planes intact.

 

- Phosphoric acid-based solutions etch silicon and compound semiconductors like indium phosphide.

 

- Metal etchants containing acids dissolve various conductors like aluminum and tungsten.

 

Wet etching allows incorporation of process control variables like temperature and concentrations to achieve straight sidewalls and high anisotropy crucial for smaller transistors and interconnects. Its scalability also suits large-scale chip manufacturing needs.

Deposition Chemicals

Thin films of materials are deposited through immersing wafers in Wet Chemicals for Electronics and Semiconductor baths. Key wet deposition chemicals are:

 

- TMAH is used for anisotropic silicon etching to form features with near vertical profiles.

 

- Silicon tetrachloride decomposes in hydrogen or nitrogen to deposit polycrystalline silicon for doping, isolation, and gate material.

 

- Metalorganic precursors like tetramethylsilane and pentadecafluorooctyltrichlorosilane form dielectrics like silicon dioxide and parylene through hydrolysis and chemical vapor deposition.

 

- Metal salts in solutions lead to selective electroless metallization of patterns, laying down seeds for electroplating of bulk copper interconnects.

 

- Immersion silver, gold and solder baths allow bumping wafers with conductive metal pads for flip-chip assembly.

 

Wet deposition processes offer low cost alternatives to physical vapor deposition and improve uniformity, surface coverage and material qualities for some applications.

Future Trends

As electronics and semiconductors progress towards smaller geometries and new materials, wet chemical formulations will need refinement. Low-k dielectricsreplacing silicon dioxide require gentler solvents and developers. Copper CMP slurries and etchants face challenges from low-k dielectrics. Solutions for deposition and patterning of new channel materials like III-V and 2D semiconductors are actively researched. Sustainable green chemistry addressing environmental hazards of existing chemicals is another focus area. Overall, wet processes will continue enabling cost-effective device scaling through materials-compatible formulations optimized for each new technology node.


Get More Insights Here

https://www.ukwebwire.com/wet-chemical-process-for-semiconductor-fabrication-technology/

disclaimer
Comments