Once the summer heat sets in there is nothing fresher than jumping out to a cool, shimmering pool. Staying lucky with that water is easier said than done, it takes diligence, detail and a bit of pool chemistry. Purchasing this guide will help you do it right so that you can spend less time chasing around with the troubleshooting of murky water and have more time to just swim.
Start with Balanced Water Chemistry
Crystal clear pool chemistry is the key to a beautiful pool. Its absence will not allow the best machines and cleaning procedures to be performed successfully. The amount of chlorine, pH levels, alkalinity and stabilizers are required to be monitored regularly.
The preferred ph of a swimming pool should be 7.4 and 7.6. Beyond the pH range the chlorine will grow ineffective causing bacteria to accumulate or the growth of algae. Chlorine alone would need to be at the range of 1.0 to whatever 3.0 parts per million would be to successfully sanitize the pool.
Cleaning Routines Make a Big Difference
It is important to carry out a cleaning routine on a regular basis. Reading the surface to clear leaves and debris every day will help avoid plugs and help alleviate the organic load in water. Sinks to the bottom dirt and particles are vacuumed once or twice per week.
The pool walls and tiles have to be brushed to get rid of the algae accumulation and thus avoid stains. Strive to focus on poorly circulated areas i.e. corners and steps. Hot humid weather favors algae in these spots more than in other spots.
Keep Your Filter System in Top Shape
When you realize that there is less flow of water, murky returns or cloudy water, this may be a time to test the filter. Other filters have a maintenance requirement every few weeks whereas others can last one month or longer. No idea what your system requires? It might be a good idea to turn to one of the qualified Murfreesboro TN pool companies, in order to receive professional assistance and inspections.
Don’t Skip the Shock Treatments
It is not a bad idea, even though your chlorine levels appear to be in good shape, to shock the pool once every 1 to 2 weeks during peak summer use even when chlorine levels are good. Shocking is associated with addition of high dosage of chlorine to destroy bacteria, algae spores and other impurities that would not be managed by the normal dosage.
Algae: Spot It Early, Act Quickly
One of the most widespread reasons for cloudy, green, or slimy water is the development of the algae in the pool. Given the correct conditions, it may become very rapid and even when there is slightly reduced chlorine levels. When you see green, black or yellow spots developing on pool walls or floors do not hesitate; start treating it with algaecide or shock treatment.
The easiest way that you can fight algae is regular brushing and good chemistry. However, should you have a recurring problem, the Murfreesboro pool company can assist to check on the cause and remedy it successfully.
Water Circulation Is Often Overlooked
Ensure that all of the return jets are on the correct direction and agitation in the water is maintained. In case there are still spots, brush yourself or bend the return directions manually to make sure there is complete coverage. It can also happen that your system is not reaching all corners and that might be fixed by adding a pool circulation booster.
Final Thoughts
Maintaining that crystal clear pool throughout the summer does not need to plunge you into a full time stay at home job. A little knowledge, with the proper tools, and a fairly regular routine and you can have a welcoming clean pool with very little stress to bear. And when you want assistance, there is a distinguished Murfreesboro pool company that is only a phone call away.
Comments
0 comment