In short, mold can spread quickly and quietly, and most homeowners don't even know it's there until it's too late. Mold likes Philadelphia because it has old buildings, terrible roads, and high humidity in the summer. Stopping something from happening is the best and cheapest thing to do. This article has some useful tips for keeping mold out of your home that are appropriate for the season.
These recommendations will help you stay healthy and save money on repairs, whether you live in a modern condo in Fishtown or a century-old townhouse in Old City.
Everything gets moist and moldy at this time of year.
Philadelphia has more rain and warmer weather in the spring. Mold loves leaks, standing water, and too much humidity inside, thus this is bad for your health.
Advice from the Experts for Spring:
· Look at your roof and gutters. Shingles might crack and gutters can get blocked during winter storms. Get rid of any trash and look for any leaks that could let water into your walls or attic.
· Check your sump pump to make sure it's working right, and also look at how the water moves in your basement. You might also want to think about getting a dehumidifier because the ground is melting and the spring rains are coming.
· Seal Foundation Cracks: Water can get into crawl spaces or basement walls, which can let mold grow and stay there for a long time. Find areas that are wet and put sealant on them to keep them dry.
Keep the air flowing and the humidity low in the summer
The summers in Philadelphia are hot and humid, which is when mold thrives best. When the humidity indoors is higher than 60%, mold can grow on walls, ceilings, or fabrics.
Advice from an expert for the summer:
· Buy a dehumidifier. A good one may dry out the air a lot, especially in basements or dwellings that don't get adequate air flow.
· Be cautious about how you use your air conditioner. It not only cools the air, but it also removes water. Make sure the filters are clean and the airways are clear.
· Close the windows when the air is too humid. It could be tempting to open them to bring in fresh air, but doing so merely lets in water.
· A lot of homes in Philadelphia need help getting rid of mold at this time of year. Regular maintenance and good airflow can completely stop that call.
Get ready for days that are colder and wetter in the fall
People sometimes forget about fall when they think about keeping mold away, but it's a really essential time to get your home ready for winter.
What Experts Say About the Fall:
· Things to Do in the Summer: Before putting away your patio furniture, cushions, and pool gear in the garage or basement, make sure they are clean and dry. This will keep mold from forming in locations you can't see.
· Look at your HVAC systems: Make sure there is enough air flow by cleaning the vents and changing the filters. This will help keep dust and moisture from building up.
· Fixing cracked caulking around doors and windows will keep your house warm, which will stop rain from coming in and condensation from forming.
Mold Inside in the Winter: Risks You Might Not Know About
Cold weather doesn't kill mold; it just makes it harder to get rid of. Moisture can get trapped in homes that are closed up, especially around windows, in the kitchen, and in the bathroom.
Winter Tips from the Pros:
· Every day, use fans to get rid of smoke. Use fans to get rid of moisture in the house while you shower or cook. You should get new fans if the ones you have don't have vents on the outside.
· Look for dampness on the windows. To keep the condensation from getting too wet, wipe it off as soon as you can. You might also want to think about putting up storm windows or windows that keep heat in.
· Put insulation where you need it because cold surfaces, like pipes and corners of the attic, can store moisture, which can let mold develop.
How to Keep Mold Out of Your Home All Year
These strategies for protecting your home from mold work all year round in Philadelphia:
· If water gets in from a leaking roof or pipe, you need to address it right soon.
· Allow the air to flow: Basements, kitchens, bathrooms, and laundry rooms all need enough air movement to keep moisture from building up.
· A hygrometer can help you keep the humidity in your home between 30 and 50%.
· You should clean often since dirt and dust can hold onto water. Cleaning gets rid of things that mold likes to devour most of the time.
· Check under furniture, in closets, and under sinks for signs of mold or dampness. Think about locations you can't see.
When to Ask for Help
Even with careful planning, mold can sometimes seep in without anybody noticing. This is especially true for older homes in Philadelphia that don't have proper air flow or where water damage could be hidden behind walls. If you smell something musty, see mold spreading, or your asthma or allergies are getting worse, you need to do something.
If you hire a skilled mold remediation Philadelphia, you can be confident that the problem will be completely cured. Professionals who have been trained may use the newest tools to look at your house, detect the moldy spots, safely get rid of the mold, and make sure it doesn't come back.
You can get rid of small, isolated mold patches on your own, but for mold that is hidden or continually coming back, you need special tools and a skilled eye.
To put it plainly
In cities like Philadelphia, where the weather changes, the homes are old, and the air is always damp, mold is a problem that never goes away. You have to do something to stop it. You may dramatically lessen your risk of having mold by taking precautions to keep it from forming in the winter and summer.
Be on the lookout for wet spots and take action right away when problems arise. If the mold gets too bad, don't be afraid to call mold removal experts in Philadelphia. They can protect your home, health, and money.
Comments
0 comment