tank foundation subsidence treatment company Accidents are a frequent problem in the construction field, causing untold loss of life and property over the years. This paper will explain the causes of the tank foundation subsidence treatment company accident and introduce several ways to treat the problem.

1. tank foundation subsidence treatment company causes of accidents

(1) Geological conditions

Geological conditions have an important effect on the stability of the foundation. tank foundation subsidence treatment company problems are likely to occur if the foundation soil of a building is poor soil such as mucky soil, high expansion soil or collapsible loess.

(2) Excessive load problem

When the load of the building exceeds the bearing capacity of the foundation, the foundation will settle. Most of these problems are man-made.

(3) Change of water table

The rise and fall of groundwater level will affect the foundation structure. When the lower water level drops, the foundation soil loses its support, resulting in settlement. On the contrary, the rise of the groundwater level will also lead to the change of the soil structure of the shallow foundation, and the bearing capacity will become lower, resulting in settlement.

(4) Construction is not standardized

The tank foundation subsidence treatment company may be caused by substandard foundation engineering, including incorrect operation during foundation construction, poor quality of foundation concrete or incorrect design of foundation structure.

(5) Environmental change

When the environmental conditions near the building change, such as construction vibration, underground mining activities, underground engineering construction, etc., the geological structure is disturbed and the bearing capacity of the foundation is changed, which will also lead to settlement.

2. Traditional foundation reinforcement method

(1) Foundation improvement

Through soil improvement technology, such as physical dynamic compaction, chemical improvement and other methods, to enhance the stability of the foundation, improve its bearing capacity, most of this method can only be used for building construction period.

(2) Pile reinforcement

Pile reinforcement is a time-honored method of foundation reinforcement, which increases the bearing capacity of the foundation by inserting concrete piles or steel piles into the foundation. However, this method is prone to earth squeezing effect, resulting in further settlement of the foundation.

(3) Micro piles or ground anchors

Micro-piles or ground anchors are implanted in the foundation to provide support for the building. This method is mostly used for local weak foundation reinforcement, but the effect of the whole foundation reinforcement is not ideal.

3. Hengxiang Hongye non-destructive and controllable tank foundation subsidence treatment company's technical plan

Using advanced engineering equipment, the raft composite foundation is applied in the soil layer to strengthen the platform and irregular support body, enhance the overall stability of the foundation, improve the bearing capacity of the foundation, and do not damage the building structure. In this process, controlled vertical forces are also generated to accurately lift the floor.

tank foundation subsidence treatment company https://en.hengxianghongye.com/repairing-the-foundation-of-infrastructure-subsidence.html